A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
K |
L |
M |
N |
O |
P |
Q |
R |
S |
T |
U |
V |
W |
X |
Y |
Z |
ALL
|
Remarked Part
|
Parts or devices in which the original part markings were removed or covered and then marked with a new part marking.
See: Recycled Part, Overproduced Part, Out-of-spec Part, Cloned Part, Tampered Part
Note: “In remarking, the counterfeiters remove the old marking on the package (or even on the die) and mark them again with forged information. During the remarking process, the components’ packages are sanded or ground down to remove old markings (part number, date code, country of origin, etc.). Then, to cover the sanding or grinding marks, a new coating is created and applied to the component. Components can also be remarked to obtain a higher specification than they are rated for by the original component manufacturer (OCM), e.g., from commercial grade to industrial or defense grade.”
|
| Sources: IDEA Standard IDEA-STD-1010-B Acceptability of Electronic Components Distributed in the Open Market, Rev. B. and “Counterfeit Integrated Circuits: Detection, Avoidance, and the Challenges Ahead” by Ujjwal Guin, Daniel DiMase and Mohammad Tehranipoor
|
|